Laser punching is performed in part by shearing, the result of placing a metal sheet between an upper tool (punch) and a lower tool (die). The upper tool plunges into the sheet producing a punching slug, which is pushed through the lower tool.

Flexible and cost effective

All tools can be used in any angular position, they require significantly fewer punching tools than other designs.

Quality

You will punch and form without any scratches with the descending die and the active die. Nothing will get caught now when forming from below. As the active die facilitates an active forming stroke from below, you also increase your range of parts.

• Punching and laser cutting in one
• Capable of processing complex geometries
• Handles very tight tolerances
• No heat affected zone on punch holes
• 50” x 120” working area
• Accuracy: +/-.004” positioning
  • Tools are all made +/-.002”
• Capable of 600 hits/min
• Force: 18 tons
• 20 Tool Stations (each tool station capable of housing multi tools)
• Min Sheet thickness: .020/.025” (if smaller than this, please consult salesperson)
• Max Sheet Thickness: .250”
• Max Sheet Weight: 330 lbs
• Max Tool Size: 3.00” (that doesn’t limit geometry)
• Bend Height: 1.00”
• 3,000 KW Laser

Punch Capabilities

• 360 degree rotation of all tools
• Countersink
• Extrude
• Engraving
• Tapping
• Blanking