Flat Bar or Gauered Flat Bar from Plate

Discover the difference between flat bars and gauered flat bars cut from plates. Learn about their dimensional tolerances and the importance of edge and corner conditions in stainless and nickel alloy products.

Plate Thickness Variations

Plate Thickness Variation​ With the increased capability of hot mills to roll heavy coil (up to ½” thick), has come an increased awareness of the thickness variations that can be present in conventional discrete hot rolled plates. In the past, plate products with a thickness of 3/16″ or more were produced as individual pieces, commonly […]

Los Angeles Operations Tour

Los Angeles Operations Tour​ with General Manager Carol Plana Watch the tour here: https://youtu.be/az_kQD8eAqk?si=yW-OC8b0FOBEK1ZG Welcome to Rolled Alloys, Los Angeles, where Carol Plana, the General Manager with nearly two decades of experience, invites you to explore our west coast facility. With just under 50,000 square feet of space, we have been serving a diverse clientele, […]

Sheet and Plate Flatness

Sheet and Plate Flatness​ We would prefer it if all plates and sheets were “flat”. Unfortunately, the reality is quite different, and the standard commercial specifications for producing these products recognize this reality.   The requirements for the flatness of plate and sheet products sold by Rolled Alloys vary considerably by the type of product, […]